One or two infeeds, with on or three phases, redundant after changing the plug-in module’s direction of connection. With measurement option in conjunction with the CMC III system.
- Article number:
- DK 7856.010
- Design
- With 2 infeeds (jack), 3-phase redundancy
- Product description
- The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
- Benefits
- Modules may be retrofitted whilst operational.
- Technical specifications
- Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
- Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
- 3-phase redundant infeed supported.
- The redundant circuit is completely separate from the 3 phases of the support rail.
- Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
- Material
- Aluminium section, natural anodised
- Type of electrical connection
- WAGO X-COM
- Qty.
- 2
- Phases per infeed
- 3~
- Rated current (max.)
- 16 A
- Module slots (max.)
- 4
- To fit
- Enclosure type: TS 8
TS IT
VX IT
Height: 1,200 mm - Operating temperature range
- 5 °C…45 °C
- Ambient humidity (non-condensing)
- 5…95 %
- Storage temperature range
- -20 °C…60 °C
- Packs of
- 1 pc(s).
- Weight/pack
- 2.289 kg
- Customs tariff number
- 85369001
- EAN
- 4028177402461
- ETIM 7.0
- EC000215
- ECLASS 8.0
- 27371306
- Product description
- DK PSM busbar, 4-way, 3~, 16 A, Infeed: 2, For H: 1200 mm
