Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation.
- Article number:
- CS 9888.560
- Design
- With cut-out for outdoor cooling units 2 – 5 kW
- Product description
- Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides. Side panels, rear panel and door fully double-walled on the outside, the entire TS 8 frame is available for interior installation.
- Material
- Enclosure frame: Stainless steel 1.4301 (AISI 304)
Enclosure panels and base/plinth trim: Aluminium, AlMg3
Rain canopy: Aluminium - Surface finish
- Powder-coated
UV-resistant pure polyester - Colour
- RAL 7035
- Supply includes
- Double-walled outdoor enclosure, fully preconfigured
Enclosure frame with 25 mm system punchings in the roof and base frame plus vertical sections with two mounting levels
Front door with door stay, swing lever handle and profile half-cylinder, lock BJ 20027
Side panels left and right
Rear panel
Rain canopy
Base/plinth with screw-fastened gland plates and screw-fastened trim panels front and rear - Dimensions
- Width: 800 mm
Height: 1,800 mm
Depth: 800 mm - IP protection category to IEC 60 529
- IP 55
- IK Code
- IK10
- Note
- All enclosure panels are doubled and earthed (external wall onto internal wall)
- CS Toptec is the ideal basis for projects in the outdoor sector. It can be requested using these Model Numbers: For stand-alone siting: 9774.099, for baying: 9774.005
- Note on Model No.
- A climate control unit is required to seal the cut-out
- Basic material
- Aluminium
- Packs of
- 1 pc(s).
- Weight/pack
- 118 kg
- EAN
- 4028177981942
- ETIM 7.0
- EC000261
- ECLASS 8.0
- 27180101
- Product description
- CS Toptec enclosure WHD: 800x1800x800 mm with cut-out for outdoor climate control units 2-5 kW
